Pioneer XDV-P6 - Manual (Page 41)

Important
If the setting is incorrect there will be no sound
so be sure to read the manuals of the connected
components.
1 Move the joystick up or down to select
OUTPUT SELECTION in the GEN.
OUTPUT SELECTION is highlighted.
2 Click the joystick.
Audio output setting menu is displayed.
3 Move the joystick up or down to select
the desired audio output setting.
The currently set audio output setting is indi-
cated with blue box. The digital output setting
selected with the joystick is highlighted.
! 48KHz – A 48 kHz signal is output regard-
less of the audio sampling frequency. A 96
kHz signal is converted to a 48 kHz signal.
(initial setting)
! 96KHz – The signal is output with the same
frequency as the audio sampling frequency.
With a 96kHz signal, you can enjoy excep-
tionally high sound quality.
4 Click the joystick.
The selected audio output setting is set.
Notes
! With discs featuring 96 kHz recording, if you
select 96KHz, audio is not output from digital
output.
! With discs that do not feature a CSS (Content
Scrambling System) copy guard signal, a 96
kHz digital signal is output.
! When using this unit with a Pioneer multi-
channel processor (DEQ-P8000), select
48KHz. If you select 96KHz, no sound will be
output when playing discs featuring 96 kHz re-
cordings.
Setting up the DVD player
En
41
Section
10
Setting
up
th
e
DVD
player