Character entry, Entering characters – Panasonic KX-TD816NZ User Manual
Page 151
4.2
Customising Your System (System Programming)
Customising Your Phone & System
151
3.
Exiting the mode
Character Entry
Entering characters
•
Press the desired character key.
•
Press the matching Soft button, press the SELECT (AUTO ANSWER) button or rotate the Jog Dial
as needed.
•
Repeat the appropriate steps for the remaining characters.
When storing a name or message, enter the characters as follows. The
tables on the next page show you the characters available for each key.
You can enter letters by pressing the alphanumeric keys on your
telephone.
Example: Key 2 can enter A, a, B, b, C or c.
•
To erase the last letter, press the
(CONF) button.
•
To erase all letters, press the CLEAR (TRANSFER) button.
•
To alternate between capital and lower case letters, press the SHIFT button. Once this
button is pressed, the mode remains until the SHIFT button is pressed again.
Press PROGRAM
or PAUSE.
OR
PAUSE
PROGRAM
A B C
A,a
B,b
C,c
2