Panasonic KX-TD816NZ - Manual (Page 148)

4.2 Customising Your System (System Programming)
148
Customising Your Phone & System
Display
The display gives you useful messages about programming. The multiple-line display also shows the
available functions. Follow the message at each step. This is a display sample in the initial
programming mode.
The message line guides you through programming and lets you confirm your selection. For example,
when "
Jack No? " is displayed, enter the jack number. The display shows up to 16 characters at
a time. To scroll the display, press or . The function line shows you the function of the Soft button
located below it. When the SHIFT button light beside the display is on, subtitles are available.
Press the SHIFT button to confirm the available functions.
Jack Number / Extension Number
Certain programming is assigned to each jack number. The jack number is where your telephone
connects to the system. If two telephones share one jack and have their own extension number (eXtra
Device Port [XDP]), the jack number is determined as Jack XX-1 for a proprietary telephone and Jack
XX-2 for a single line telephone. The display may show XX-2, even if an extension has not set XDP.
If you do not know the jack number or extension number,