Panasonic KX-TD816NZ - Manual (Page 58)

2.4 During a Conversation
58
Operation
2.4.3 Transferring a Call
Transferring to an extension
Transferring to an external party
Some extensions may be restricted from performing this function.
— Transferring to an extension — Transferring to an external party
• If you misdial, press the FLASH (PT only) button, and re-enter the number.
• If a call between two external parties is established, both parties will hear an alert tone
fifteen seconds before the time limit (Default: 10 min.) runs out. The original extension will
hear an alarm fifty seconds before the time runs out.
• To return to the held call before the destination answers, press the TRANSFER button,
corresponding CO, INTERCOM button, or the hookswitch.
• To return to the conversation after completing the transfer to an external party, press
the corresponding CO button.
• If you hear an alert tone, the destination extension did not answer the call. Answer the call.
• This feature is not available for an ISDN telephone user.
• If you transfer a call with the DSS button, you do not have to press the Transfer button
(One-Touch Transfer).
Enter extension
number or press DSS. On-hook. Talk.
extension no.
OR
During a conversation
The destination is confirmed before
sending. This can be disregarded.
Press TRANSFER
or hookswitch.
OR
PT / SLT
C.Tone
TRANSFER
(DSS)
Press CO or enter
line access number
(9 or 81-88). On-hook. Enter phone number. Talk.
phone no.
During a conversation
OR
line access
no.
PT / SLT
Press TRANSFER
or hookswitch.
OR
C.Tone
TRANSFER
(CO)