Additional information – Pioneer AVH-P4100DVD User Manual

Page 105

Advertising
background image

Liquid crystal display (LCD) screen

! If the display is near the vent of an air con-

ditioner when it is opened, make sure that
air from the air conditioner is not blowing
on it. Heat from the heater may damage
the LCD screen, and cool air from the cool-
er may cause moisture to form inside the
display resulting in possible damage. Also,
if the display is cooled down by the cooler,
the screen may become dark, or the life
span of the small fluorescent tube used in-
side the display may be shortened.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a problem with
the display.

! At low temperatures, the LCD screen may

be dark for a while after the power is turned
on.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a portable phone, keep the an-

tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.

For viewing the LCD comfortably

Due to its construction, the viewing angle of
the screen size is limited. You can adjust it by
changing either screen size or picture adjust-
ment.

LED (light-emitting diode)
backlight

! At low temperatures, using the LED back-

light may increase image lag and degrade
the image quality because of the character-
istics of the LCD screen. Image quality will
improve with an increase in temperature.

! To protect the LED backlight, display will

darken in the following environment:
— In the direct sunlight

— Near the heater vent

! The product lifetime of the LED backlight is

more than 10 000 hours. However, it may
decrease if used in high temperatures.

! If the LED backlight reaches the end of its

product lifetime, the screen will become
dark and the image will no longer be pro-
jected. In this case, please consult your
dealer or the nearest authorized PIONEER
Service Station.

Changing the wide screen size

By changing the screen size from 4:3 to 16:9,
you can adjust the screen so that the screen
can fit to the video image you are playing.
For details concerning operation, refer to
Changing the wide screen mode on page 52.

Changing the picture adjustment

You can make the best adjustment to the pic-
ture display by the

Brightness, Contrast,

Color, Hue, Temperature and Black Level.
You can also dim or brighten the overall pic-
ture the

Dimmer.

For details concerning operation, refer to
Changing the picture adjustment on page 53.

Keeping the display in good
condition

! When removing dust from the screen or

cleaning the display, first turn the system
power off, then wipe with a soft dry cloth.

! When wiping the screen, take care not to

scratch the surface. Do not use harsh or
abrasive chemical cleaners.

Small fluorescent tube

! A small fluorescent tube is used inside the

display to illuminate the LCD screen.

Additional Information

En

105

Appendix

Additional

Information

Advertising