Disc 20, Scanningtracks of a cd, Pausingcd playback – Pioneer DEH-P1Y User Manual

Page 20: Selectingthe search method, Searchingevery 10 tracks in the current disc, Built-in cd player

Advertising
background image

Scanningtracks of a CD

Scan play lets you hear the first 10 seconds of

each track on the CD.

1 Use Multi-Control to select Scan.

Scan appears in the display.

2 Press Multi-Control to turn scan play

on.

Scan :ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired trackpress

Multi-Control to turn scan play off.

Scan :OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to
the playback display, select Scan again by using
Multi-Control.

Note

After scanning of a CD is finished, normal play-
back of the tracks will begin again.

PausingCD playback

Pause lets you temporarily stop playback of

the CD.

1 Use Multi-Control to select Pause.

Pause appears in the display.

2 Press Multi-Control to turn pause on.

Pause :ON appears in the display. Play of the

current track pauses.

# To turn pause off, press Multi-Control
again.

Selectingthe search method

You can switch the search method between

fast forward/reverse and searching every 10

tracks.

1 Use Multi-Control to select FF/REV.

FF/REV appears in the display.

# If the search method ROUGH SEARCH has
been previously selected, ROUGH SEARCH will
be displayed.

2 Press Multi-Control to select the search

method.

Press Multi-Control until the desired search

method appears in the display.

! FF/REV  Fast forward and reverse
! ROUGH SEARCH  Searching every 10

tracks

Searchingevery 10 tracks in

the current disc

If a disc contains over 10 tracks, you can

search every 10 tracks. When a disc contains

a lot of tracks, you can roughly search for the

track you want to play.

1 Select the search method

ROUGH SEARCH.

Refer to Selecting the search method on this

page.

2 Push and hold Multi-Control left or

right to search every 10 tracks on a disc.

# If a disc contains less than 10 tracks, pushing
and holding Multi-Control right recalls the last
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi-Control right re-
calls the last track of the disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi-Control left recalls the first

Built-in CD Player

En

20

Section

05

Advertising