Removing the front panel 7, Attaching the front panel 7, About the demo mode 7 – Pioneer DEH-P1Y User Manual

Page 7: Reverse mode 7, Feature demo 7, About the demo mode, Before you start

Advertising
background image

Removingthe front panel

1 Press EJECT to open the front panel.

2 Slide and remove the front panel to-

ward you.

Take care not to grip it too tightly or to drop

the front panel and protect it from contact

with water or other fluids to prevent perma-

nent damage.

3 Put the front panel into the protective

case provided for safe keeping.

Attachingthe front panel

1 Make sure the inner cover is closed.

2 Replace the front panel by clipping it

into place.

About the demo mode

This unit features two demonstration modes.

One is the reverse mode, the other is the fea-

ture demo mode.

! You cannot cancel a demo mode when the

front panel is open.

! When the front panel is open, BAND,

ENTERTAINMENT, EQ and EQ-EX are not

available.

Important

The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.

Reverse mode

If you do not perform an operation within

about 30 seconds, screen indications start to

reverse, and then continue reversing every 10

seconds. Pressing BAND when power to this

unit is turned off while the ignition switch is

set to ACC or ONcancels the reverse mode.

Press BAND again to start the reverse mode.

Feature demo

The feature demo automatically starts when

power to this unit is turned off while the igni-

tion switch is set to ACC or ON. Pressing

ENTERTAINMENT during feature demo opera-

tion cancels the feature demo mode. Press

ENTERTAINMENT again to start the feature

mode. Remember that if the feature demo

continues operating when the car engine is

turned off, it may drain battery power.

Before You Start

En

7

English

Section

01

Advertising