Psion Teklogix MLP 3040 Series - Manual (Page 15)

Daily Operation
Introduction
For normal daily use, most users will only need to turn the printer on and off, load paper, and recharge the
battery at the end of the day. The following sections describe these simple activities and provide additional
information regarding the use of the MLP 3040.
Control Panel
The MLP 3040 series printers are designed for simple operation with an easy to use control panel. As shown in
Figure 6, the control panel consists of an LCD Display, five indicators, and four pushbuttons.
Power Indicator
Wireless Indicator
MCR Indicator
LCD Display
IrDA Window
Error Indicator
Battery Indicator
Enter Button Increment Button
Power Button
Paper Feed Button
/Advance Button
Figure 6 - Control Panel
In normal daily use, most users will only use the Power Button/Indicator and perhaps the Paper Feed
Button, and observe any messages that may appear on the LCD Display. The purpose and functionality of all of
the buttons and indicators are listed below.
Power Button – Used to turn the printer on or off.
Paper Feed
/Advance Button
– In Roll Feed models, advances paper 1.25” (32mm).
In SL models, loads or ejects a sheet of paper.
Also used to clear Check Paper conditions.
9