Psion Teklogix MLP 3040 Series - Manual (Page 59)

Specifications
Media Specifications
Receipt Paper
General Specifications: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
Black Mark Sensing On Printed Side
(Black Mark Sensing On Back Side and Gap Sensing On MLP 3040 LP Models)
MLP 3040, MLP 3040 LP: 3 to 4.125” (76.2 to 104.78mm)Wide
(Roll Media) 0.750” (19.05mm) Inside Diameter Core
2.625” (66.68mm) Maximum Outside Diameter
MLP 3040 SL: 3 to 4” (76.2 to 101.6mm) Wide
(Preloaded Cassette) 6” Maximum Length
100 Sheets Maximum Per Cassette
Approved Vendors: Kansaki: P300, P310, P350, P354, P390*, P530UV, TO281CA,
OP200, TO381N, F180, F380, F550
Jujo: TF-50KS-E2C
Honshu: FH65BV-3
Appleton: Resiste 900-3.0*
*Standard Psion Teklogix Offering
Labels
MLP 3040: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side
2.625” Maximum Outside Diameter
4.125” Maximum Width (carrier)
MLP 3040 LP: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side Or Back Side
Gap Sensing Between Labels
2.625” Maximum Outside Diameter
4.125” Maximum Width (carrier)
53