PYLE Audio PL2DNTV7 - Manual (Page 5)

CAUTION! The material of display area is made by glass with a protector film attached
on it. Do not use hard or sharp objects to strike or scratch the surface of the display
area. Otherwise it may cause the picture distorted or have scars forever.
Remote Control Button Functions
1. Power
Turn on or off this unit.
2. Setup
(1) DVD/CD changer mode
DVD built-in functions menu (refer to SANYO
DVD/CD changer Specification)
3. Up/Down
(1) DVD changer mode
It is the up/down button under Setup/Menu
status.
Press and hold this button to choose the
Previous/Next disc.
(2) TV mode
To choose the previous/next pre-set station
4. SEL (Selection)
(1) Press this button, to select
a. Initial volume setup
b. TA volume setup
c. Bass adjustment(use VOL+/- to adjust)
d. Treble adjustment(use VOL+/- to adjust)
e. Balance adjustment(use VOL+/- to adjust)
f. Fader adjustment (use VOL+/- to adjust)
(2) Push and hold this button to select
a. Loud on/off
5. Enter
(1) under DVD menu state, to confirm your selected item.
(2) TV mode, press this button to affirm after input 0~9.
6. Left / Right
When startup the Setup/Menu/P. Menu function, to reduce/increase the system value or
choose in the left/right direction.
3