Pioneer XW-DV515 - Manual (Page 73)

Other connections 12
73
En
English
Italiano
Français
Nederlands
Español
Deutsch
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See
S-Video Out on page 64 for
more on this.
Connecting using the
component video output
Not applicable to the European model
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
• The component video ouptut is
switchable between interlaced and
progressive formats. See
Component Out
on page 63 for more on this.
Using the SCART AV output
European model only
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
OPTICAL IN
VIDEO
OUT
S-VIDEO
OUT
LINE 2
AUDIO
VIDEO COMPONENT VIDEO OUT
ANTENNA
FM
UNBAL 75 Ω
AM
LOOP ANTENNA
P R P B Y
TV
XV–DV515
S-VIDEO
INPUT
COMPONENT VIDEO OUT
ANTENNA
FM
UNBAL 75 Ω
AM
LOOP ANTENNA
P R P B Y
TV
XV–DV515
COMPONENT
INPUT
HTS.book 73 ページ ２００３年２月２５日 火曜日 午後２時３７分