Tuner, Error messages, English italiano français – Pioneer XW-DV515 User Manual

Page 83: Nederlands, Español deutsch, Additional information 13

Advertising
background image

Additional information

13

83

En

English

Italiano

Français

Nederlands

Español

Deutsch

Tuner

Error Messages

Problem

Remedy

Considerable noise in
radio broadcasts.

• Tune into the correct frequency.
• Connect the antenna (refer to the Setup Guide).
• Fully extend the FM wire antenna, position for best reception, and secure
to a wall.
• Connect an outdoor FM antenna (see

Connecting external antennas

on

page 70).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and

Connecting external antennas

on page 70).

• Turn off any other equipment that may be causing the noise or move it
away from the main unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (see

Changing the frequency step

on page 76).

Auto tuning does not
pick up some stations.

• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.

Sound is mono only.

• Check that the tuner is not set to FM mono (see

Improving poor FM

reception

on page 29).

Message

Desciption

Child Lock

• This message appears when the front panel buttons are pressed when
the child lock feature is active. See

Child Lock

on page 75 for more on

switching on/off the child lock.

Rec Mode On

• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see

Recording mode

on page 72).

Phones In

• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.

96K Stereo

• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.

No Surr. SP

• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.

Muting

• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (see

Muting the sound

on page 36).

Exit

• Appears briefly when a menu is automatically exited after a set period of
inactivity.

HTS.book 83 ページ 2003年2月25日 火曜日 午後2時37分

Advertising
This manual is related to the following products: