Palsonic TFTV680S - Manual (Page 21)

Basic Operation
18
TV ------------------ select TV signal.
Video 1 -------------- select signal from AV1 terminal.
Video 2 -------------- select signal from AV2 terminal.
S-Video ----------- select signal from S-Video terminal.
YPbPr -------------
select signal from YPbPR or YCbCr terminals.
D-Sub ------------- select signal from D-Sub (15-pin D-sub) terminals.
DVI ----------------- select signal from DVI terminals.
Changing Channels
Using the Channel Buttons (CH or CH )
Press the CH or CH to change channels.
When you press the CH or CH , the unit changes channels in sequence. You will see all the channels that the unit has
memorised.
You will not see channels that were skipped.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel:
Input the channel number by using the 0-9 number buttons directly.
To select a two-digit channel:
Press -/-- to display "- -" and input the channel number by using the 0-9 number buttons.
To select a three-digit channel:
Press -/-- to display "- - -"and input the channel number by using the 0-9 number buttons.
Note:
When you use the number buttons, You may directly select channels that were skipped.
Using the RETURN button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL- and VOL+)
Press the VOL+ or VOL- to increase or decrease the volume.
Muting the Sound
Using the MUTE button
At any time, you can temporarily turn off the sound using the MUTE button.
Press the MUTE button and the sound turns off.
To turn mute off, press the MUTE button again.
Select input source signal
Press SOURCE to access source select menu.
Press CH to select a desired signal source.
You may directly press the relevant number button to select a desired
signal source.
Press ENTER to confirm.
Note:
You may quickly switch from other inputs to TV program by pressing the number buttons or CH .
3
2
1
2
1
1. TV
2. Video 1
3. Video 2
4. S-Video
5. YPbPr
6. D-Sub
7. DVI
Select Main Source