Palsonic TFTV680S - Manual (Page 22)

Setting Picture
19
Using the Preset Picture Mode
Press ENTER to confirm and press MENU repeatedly to exit.
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].
Each preset mode has its own picture settings.
[Vivid]: Select for a bright picture.
[Standard]: Select for a normal picture.
[Mild]: Select for a fine/soft picture.
You may directly use the P.M button on the remote control to select a desired picture mode.
Press MENU to display the menu main page.
The [Video] menu page will be highlighted automatically.
Customising the Picture
Press MENU to display the menu main page.
The [Video] menu page will be selected automatically.
Press CH to select Mode item.
Press VOL+ or ENTER to access the sub-menu.
Press CH to select a desired picture mode.
Press CH to enter the menu and select item with CH or CH .
Press VOL+/- to adjust the value of the item.
Press MENU to exit.
* The [Hue] item is for NTSC only
Reducing Picture Noise
Press MENU to display the menu main page.
The [Video] menu page will be selected automatically.
Press CH repeatedly to select the DNR item.
Press VOL+ or ENTER to access the sub-menu.
Press CH to select.
Press ENTER to confirm and press MENU repeatedly to exit.
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps
to enhance the picture quality by reducing the noise.
Freezing picture
Press the FREEZE button to hold on the image on the screen (the video
sources still run). Press again to reactivate the image.
Note:
For the sake of protecting the screen, please do NOT freeze a picture for a long time.
4
3
2
1
5
4
3
2
1
4
3
2
1
5
Vivid
Standard
Mild
Custom
Audio Video Screen Option Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
Standard
50
50
50
00
50
AUTO
Weak
Medium
Strong
Auto
Audio Video Screen Option Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
Standard
40
60
50
00
50
AUTO
Audio Video Screen Option Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
Standard
40
60
50
00
50
AUTO
Increase contrast
More bright
Higher colour intensity
Towards green
Sharp picture
Decrease contrast
Less bright
Lower colour intensity
Towards purple
Soft picture
Contrast
Brightness
Colour
Hue *
Sharpness
0 - 100
0 - 100
0 -100
-50 - +50
0 - 100
Press VOL-
Contrast
Brightness
Colour
Hue *
Sharpness
Press VOL+ Value range Adjustment item