PYLE Audio PLDVD7M - Manual (Page 5)

Installation
● Place the mounting bar on the poles of headrest and then tighten 4 long
screws until the mounting bar is fastening firmly to the headrest poles.
● Put the adapter on the face of L type mounting stand and screw it tightly.
● Slide the engagement nut into the slide bracket slot on the rear of the
monitor housing.
● Slide the engagement head on the monitor into the adapter of L-type
mounting stand and tighten firmly.
● Insert the L type mounting stand on the monitor into the mounting
bar and screw tight until the monitor is securely fastened to the
Mounting stand.
● Squeeze the clamp of engagement head and pull up to release monitor
from bracket.
4