Pentax DS2 - Manual (Page 60)

58
3
B
asic Op
er
atio
ns
7
Press the shutter release
button fully.
For g, the self-timer lamp starts
blinking slowly and blinks rapidly 2
seconds before the shutter is released.
The beep is heard and the rate
increases. The shutter will be released
about 12 seconds after the shutter
release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter
release button is pressed fully.
8
Turn the camera off after
shooting.
The next time the power is turned on,
self-timer shooting is canceled and
returns to single frame shooting.
• The beep can be turned off. (p.164)
• Exposure may be affected if light enters the viewfinder. Attach the provided
ME viewfinder cap or use the AE lock function (p.143). (Ignore the light
entering the viewfinder when the exposure mode is set to a (Manual)
(p.139).)
• Remove the Eyecup F
L
by pulling one side upward when using accessories
such as the ME viewfinder cap.
Removing the Eyecup F
L
Attaching the ME Viewfinder cap