Pentax DS2 - Manual (Page 92)

90
3
B
asic Op
er
atio
ns
1
Use the four-way controller (23) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen
appears. Use the four-way controller
(45) to check the number of copies
for each image, whether the date is
imprinted or not, and total number of
copies. Print settings are set with the
Print Service. (p.79)
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 and 11 of “Printing Single Images” (p.87 and 88) for
details on how to change the settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the cable from the printer when you have finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the Cable from the Printer
1
10 10
Date Date Copies Copies
Total Total
1
10
Date
OK
Copies
Total
Print Print Print
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings