Panasonic KX-FT901BX User Manual

Page 44

Advertising
background image

8. Answering Device (KX-FT907 only)

44

To monitor the room

Press {6} to activate the unit’s microphone and
listen to the room where the unit is located for
about 30 seconds.

L

After 30 seconds, a beep will sound. To
continue monitoring, press {6} again within
10 seconds.

To record a marker message
After playing back messages, you can leave an
additional message.

1. Wait for 3 beeps indicating the end of the

remote operation.

2. Wait for 1 beep.

3. Wait about 10 seconds.

L

The voice guide and/or 1 beep will be
heard.

4. Leave a message.

To re-record your greeting message
You can record a new TAD/FAX greeting
message.

1. Press {7} to start recording.

L

A long beep will sound.

2. Speak clearly for up to 16 seconds.

L

If you pause for over 2 seconds, 6 beeps
will sound and recording will stop. Repeat
from step 1 within 10 seconds.

3. To stop recording, press {9}.

L

The new greeting message will be played.

To skip the greeting message
Press {0} during the greeting message
playback.

L

The unit will skip the rest of the greeting
message.

To turn message transfer ON or OFF
You must program a transfer telephone number
beforehand (feature #60, page 50).
Press {8}{1} to turn ON the message transfer.
Press {8}{2} to turn OFF the message transfer.

L

If a transfer telephone number is not
programmed, you cannot turn this feature
ON. 6 beeps will sound.

To turn pager call ON or OFF
You must program a pager number beforehand
(feature #70, page 37).
Press {8}{3} to turn ON the pager call.
Press {8}{4} to turn OFF the pager call.

L

If a pager number is not programmed, you
cannot turn this feature ON. 6 beeps will
sound.

To change from TAD/FAX to TEL mode
Press {8}{0} to change the receiving mode from
TAD/FAX to TEL.

L

You cannot return to TAD/FAX mode in the
same call. To return to TAD/FAX mode, see
the following.

To change from TEL to TAD/FAX mode

1. Call your unit and wait for 10 rings.

L

The answering device will temporarily
answer the call.

2. Enter the remote operation ID (feature #11,

page 47) during the greeting message.

L

A long beep will sound, and your unit will
switch to TAD/FAX mode.

3. Hang up the handset.

FT-901-903-907BX.book Page 44 Monday, March 29, 2004 10:03 AM

Advertising
This manual is related to the following products: