Pioneer DV58AV_KU_EN - Manual (Page 15)

02
15
En
About HDMI
HDMI (High-Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed to
provide the technologies of High-bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specification. HDCP is used to protect digital content transmitted
and received by DVI-compliant displays.
HDMI has the capability to support standard, enhanced, or high-
definition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to five gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
About HDMI Control
You can enable HDMI Control by turning the HDMI Control setting
to On for all components connected via HDMI cable. Check the
video output from this unit once you have completed making
connections and settings for all components. You will need to check
the video output each time you change connected components or
remove the HDMI cable.
Note that HDMI Control may not operate properly if you do not use
an HDMI cable that supports the HDMI 1.3 specification
(Category 2)
or later.
Changing the output resolution
Use the OUTPUT RESOLUTION button located on the remote
control to switch the output resolution for the HDMI and component
video outputs.
Depending on the type of disc or file being played, the signals may
not be output with the resolution set at
Resolution (Max) (page 33).
For details, see the table below.
Note
• If analog video signals are output at a resolution of 1080i or 720p,
the GUI screen may look rough. This is not a malfunction.
Resetting the output resolution to the default setting
with HDMI connection
Use the OUTPUT RESOLUTION button on the remote control to
switch the player back to 480p. You can also switch the player to
standby then, using the front panel controls, press  STANDBY/
ON while pressing   to switch the player back to 480p.
Resolution (Max) setting
480i 480p 1080i 720p 1080p
DVD 480i 480p 480p 480p 480p
DVD-Audio 480i 480p 480p 480p 480p
DivX video/WMV 480i 480p 1080i 720p 480p
JPEG 480i 480p 1080i 720p 480p
Audio CD/
Super Audio CD 480i 480p 480p 480p 480p
MP3/WMA/MPEG-4
AAC
480i 480p 1080i 720p 480p
Video CD 480i 480p 480p 480p 480p
DV58AV_KU_EN.book 15 ページ ２００７年８月３０日 木曜日 午後１時５３分