Planet Technology ICA-650 - Manual (Page 30)

Camera Tour To use the camera tour function, user must preset some camera
positions first.
Select the “SET Tour” button to enter the Camera Tour setting
page.
Reset to
Default Restore the values of these pages to factory default value.
Camera Tour
In the Camera Tour page, choose the one tour name. Fill the dwelling time and tour
sequence by preset points, can repeat above procedure to set more camera tours.
Camera Tour Screen
Data – Camera Tour Screen
Camera Tour Settings
Tour Name Choose the one tour name from A to E
Dwelling Time
The time period between every tour point.
Sequence
16 points can be assigned.
Enable
Enable camera tour group should be activated
To use the camera tour function, user must preset some camera
positions first. The maximum number of preset points is 16.
In the Camera Tour page, choose the one tour name from A to E.
Fill the dwelling time and tour sequence by preset points, and
then save these setting. You can repeat above procedure to set
more camera tours.
L
Hint
26