Panasonic DMC-FZ20GN - Manual (Page 20)

Preparation
20
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 2 appears.
• The screen disappears in about
5 seconds. Start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P22)
2 Set date and time.
• 2/1: Select the desired item.
• 3/4: Set date and time.
3 Select [D/M/Y], [M/D/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET MENU
SETUP 2 /
4
BEEP
CLOCK SET
SELECT
LEVEL 3 VOLUME
NO.RESET
SHUTTER
EXIT MENU
MENU
D/M/Y
2004 . . 10 00 :
CLOCK SET
EXIT MENU SET SELECT
1 1 DEC
EXIT
10:00 1 1.DEC.2004
MENU
D/M/Y
CLOCK SET
SET SELECT
FZ20-GN.book 20 ページ ２００４年８月９日 月曜日 午後５時５１分