Panasonic DMC-FZ20GN - Manual (Page 33)

Recording pictures (basic)
33
• When you press the shutter button, the
screen may become bright for a moment.
This function allows easy adjustment of
focus and the recorded picture will not be
affected.
• We recommend setting the clock again
before taking pictures. (P20)
• When the time for power save is set (P22),
the camera is automatically turned off if
you do not operate within the set time.
When operating the camera again, press
the shutter button or turn the camera off
and on.
• In some cases, if the distance between
the camera and the subject is beyond the
recordable range when you use the
camera, the picture may not be properly
focused even if the focus indication is lit.
∫ Programme shift
In Programme AE mode, you can change
the preset aperture value and the shutter
speed under the same exposure. This is
called Programme shift.
By this function, you can make the
background more blurred (by decreasing
the aperture value) or record the moving
subject more dynamically (by setting to
slow shutter speed) in Programme AE
mode.
• Press the shutter button halfway and then
press the [EXPOSURE] button while the
aperture value and the shutter speed are
displayed on the screen (for 10 seconds).
Then press
2/1 to activate the
Programme shift.
• When the Programme shift is activated,
the Programme shift indication 1 appears
on the screen.
EXPOSURE
1/30 F4.0
2560
19
PROGRAM SHIFT
1/60 F2.8
2560
19
PROGRAM SHIFT
FZ20-GN.book 33 ページ ２００４年８月９日 月曜日 午後５時５１分