PYLE Audio PLTV65R - Manual (Page 13)

- Retrieve a Preset Station
Press any one of the buttons (15)
on the front panel or (37) on
remote control to retrieve a
station which had been stored in
the memory in advance the
chosen number is shown on
display.
13
OPERATION
Automatic memory storing &
program scanning
- Automatic memory storing
Press AS/PS button (48) for
several seconds, the radio
searches from the current
frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest
stations are stored into the
corresponding preset number
button.
- Program scanning
Press AS/PS button (48) shortly
to scan preset station. When the
field strength level is more than
the threshold level of stop level.
The radio is holding at that
preset number for several
seconds with release mute, then
searches again.
Local/distant
Press LOC button (38) on remote
control to select between local and
distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is effect during AUTO SEEK
operation.
Mono/stereo
Press MO/ST button (16) on the front
panel or ST/MO button (53) on remote
control to select mono or stereo mode.
You can sometimes improve reception
of distant stations by selecting mono
operation.
Scan
Press -/-- (SCAN) button (39) on
remote control to set the function to
scan mode, which scanning to higher
frequency station with receivable
signal and keep on each station for
several seconds. At this time, press
any one of the buttons (15) on the
front panel or (37) on remote control,
the current scanned station will be
stored into the corresponding number
button, then it keeps on scanning
other stations.
CDC operation
Switching to CDC mode
Press MODE button (12) on the front
panel or MODE button (42) on the
remote control to select CDC mode.
Selecting tracks
Press TUNING/TRACK button (14)
on the front panel to move to the
previous track; press TUNING/
TRACK button (13) on the front
pane lto move to the next track. The
track number shows on the display(4).
Pausing playing
Press PAU button (28) on the front
panel to pause CD play. Press it
again to resume play.
Previewing all tracks
Press INT button (29) on the front
panel to play the first 10 seconds of
each track on the current disc. Press
it again to stop intro and listen to
track.
Repeating the same track
Press RPT button (30) on the front
panel to continuously repeat the
same track on the current disc. Press
it again to stop repeating.
Playing all tracks in random
Press RDM button (31) on the front
panel to play all tracks on the current
CD in random order. Press it again to
cancel the mode. In the course of
playing a track, press TUN/CH /
buttons (46) to play another track in
random order.
Selecting disc
Press CD+ button (33) on the front
panel to select next disc and press
CD- button (32) on the front panel to
select previous disc.