Panasonic PV-24DF62 - Manual (Page 24)

24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some
basic DSS or Cable box functions.
The Universal Remote Control Setup
1
Using the Universal Remote Control
Press TV or DVD, or DSS CABLE on the
remote control to select the desired mode. (See
below for buttons available in each mode.)
Once the remote control has been properly set up, you
can select TV, DVD, DSS or CABLE mode depending on
which functions you wish to control. (See below.)
Find your DSS box or Cable box
Brand Code Number from one of
the charts on the next page.
3 Confirm code entry.
Press POWER* to turn selected unit
ON or OFF.
• See below for controllable functions in each mode.
• Please repeat the Universal Remote Control Setup after
replacing remote control batteries.
• The remote control will not operate all DSS receivers or
Cable Boxes made by the manufactures listed. If you get
no results, your particular brand cannot be controlled.
Set to TV, DVD:
• All TV and DVD functions.
Set to DSS CABLE:
• CABLE/DSS functions, e.g. POWER, ENTER,
Number Keys (except 100 key), CH UP/DOWN.
Notes
2 Setup remote.
Hold down DSS CABLE and press
Number Keys to enter code.
• For code 100 or greater, first press 100 key,
then the remaining digits. E.g. for 102, press
100, then press 0, and then press 2.
ENTER
POWER
NUMBER Keys
DSS/CABLE
TV
LIGHT
TITLE MENU
DISPLAY
ADD/DLT
PAUSE
DSS
CABLE
+ SKIP SKIP PLAY
STOP
SLOW/SEARCH
+
VOL
CH
CH
VOL
10
SUB TITLE ANGLE
ZOOM
AUDIO
OPEN/CLOSE
CLEAR
ENTER
MU
TE
S U
R
R O
U N
D
TIME
R
R -T
U
N
E
ACTION RETURN
D V D TV
S E T
DVD