Panasonic AJ-SD255P - Manual (Page 16)

31
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu <AUDIO>
No./Item Description
734
MONI SEL
INH
This selects whether the operation of
the MONITOR SELECT button on the
front panel is to be enabled or
disabled.
0000 OFF : Operation is enabled.
0001
ON : Operation is disabled.
0002 ON1 :
Operation is disabled in the FULL
display mode and enabled only in the
FINE display mode.
750
DV PB ATT
This selects the audio output level
during DV playback.
0000 OFF :
The audio output level is not
attenuated.
0001 ON :
The audio output level is attenuated
(reduced).
751
REC PT
MUTE
This selects whether to mute the
sound where recordings are joined
during DV/DVCAM
0000 OFF : The sound is not muted.
0001
ON : The sound is muted.
752
DV OUTPUT
This selects the AUDIO CH1 and CH2
output signals during DV or DVCAM
format playback.
0000 ST1 :
The CH1 track signals are output to
CH1 and the CH2 track signals to
CH2. (Only the sound during shooting
is output.)
0001 ST2 :
The CH3 track signals are output to
CH1 and the CH4 track signals to
CH2. (Only the audio dubbing sound is
output.)
0002 ST1+2 :
The mixed CH1 and CH3 track signals
are output to CH1 and the mixed CH2
and CH4 track signals to CH2. (The
sound during shooting and audio dubbing
sound are output simultaneously.)
Note:
This menu item takes effect only when a
DV or DVCAM cassette tape with a 32
kHz/4-channel recording is played back.
753
REF LEVEL
For setting the audio reference level.
(For AJ-SD255E)
0000 FS-20 : –20 dB
0001 FS-18 : –18 dB
0002 FS-12 : –12 dB
(For AJ-SD255P)
0000 FS-20 : –20 dB
0001 FS-18 : –18 dB
0002 FS-12 : –12 dB