Panasonic AJ-SD255P - Manual (Page 4)

Setup menus (continued)
19
Loading user files
The contents of the USER2, USER3, USER4 or USER5
file can be copied (loaded) into the USER1 file. Also, the
contents of the USER1 file can be copied (saved) into the
USER2, USER3, USER4 or USER5 file.
(1) Press the MENU button.
(2) Press the REW button or FF button while
holding down the PF button to select the
USER1 file.
(3) Operate the joystick, and move the cursor ( ) on
the menu screen to item No.A00 (LOAD).
USER 1 USER 2
USER 3
USER 4
USER 5
Load/save Lock mode can be
set
Lock mode can be
set
Lock mode can be
set
Lock mode can be
set
Load/save
Load/save
Load/save
SETUP-MENU
<USER1>
8 0 4
A 0 0
A 0 1
A 0 2
END
BLANK LINE
LOAD
SAVE
P. ON LOAD
BLANK
USER2
USER2
OFF
NO . A 0 0 - 0 0 0 0
MENU
SETUP-MENU
<USER1>
8 0 4
A 0 0
A 0 1
A 0 2
END
BLANK LINE
LOAD
SAVE
P. ON LOAD
BLANK
USER2
USER2
OFF
NO . A 0 0 - 0 0 0 0
MENU
SETUP-MENU
U S E R 2 U S E R 1 O K ?
Y E S < P L A Y > / N O < S T O P >
LOAD
(4) Incline the joystick to the left or right to
s e l e c t t h e u s e r f i l e w h o s e
contents are to be loaded into USER1.
(5) Press the joystick.
The following message appears on the menu screen and
counter display.
Menu screen
Counter display
The number of the user file selected in step (4) is
displayed at .
(6) Press the PLAY button
The settings of the user file selected in step (4) are
loaded, and the USER1 menu display appears. If the
STOP button is pressed instead, the settings are not
changed, and the USER1 menu display appears.
(7) Press the MENU button.
A confirmation screen now appears.
When the PLAY button is pressed, the USER1 settings
are stored in the memory. If the settings are not to be
stored in the memory, press the STOP button instead.
Saving user files
(1) Press the MENU button.
(2) Press the REW button or FF button while
holding down the PF button to select the
USER1 file.
(3) Operate the joystick, and move the cursor ( ) on
the menu screen to item No.A01 (SAVE).
(4) Incline the joystick to the left or right to select
the user file in which the contents of USER1 are
to be saved.
Those user files which have been set to the lock mode do
not appear on the display. If all the user files have been
set to the lock mode, the “LOCKED” display appears, and
the contents of USER1 cannot be saved into any of the
user files.
(5) Press the joystick.
The following message appears on the menu screen and
counter display.
Menu screen
SETUP-MENU
U S E R 1 U S E R 2 O K ?
Y E S < P L A Y > / N O < S T O P >
SAVE
Counter display
The number of the user file selected in step (4) is
displayed at .
(6) Press the PLAY button
The settings of USER1 are saved in the user file selected
in step (4) and stored in the memory. If the STOP button
is pressed instead, the settings are not changed, and the
USER1 menu display appears.
(7) Press the MENU button.
The regular display is restored.
Automatically recalling a user file when
turning on the power
If the user file to be loaded is selected in advance using
setup menu No. A02 (P.ON LOAD), the file will be
automatically loaded into USER1 when the power is
turned on.