Pioneer SUPER TUNER 3 D AVIC-Z120BT - Manual (Page 15)

Ejecting a disc (for AVIC-Z120BT)
p This section describes operations for AVIC-
Z120BT.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3 Remove the disc, and press the h but-
ton.
The LCD panel closes.
Inserting a disc (for AVIC-X920BT)
p This section describes operations for AVIC-
X920BT.
% Insert a disc into the disc loading slot.
p Do not insert anything other than a disc
into the disc loading slot.
Ejecting a disc (for AVIC-X920BT)
p This section describes operations for AVIC-
X920BT.
1 Press the h button.
The touch panel keys for ejecting the media
appear.
2 Touch [Disc Eject].
The disc is ejected.
Inserting and ejecting an
SD memory card
WARNING
Ejecting an SD memory card during data transfer
can damage the SD memory card. Be sure to
eject the SD memory card by following the proce-
dure described in this manual.
CAUTION
If data loss or corruption occurs on the storage
device for any reason, it is usually not possible to
recover the data. Pioneer accepts no liability for
damages, costs or expenses arising from data
loss or corruption.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
(for AVIC-Z120BT)
p This section describes operations for AVIC-
Z120BT.
En
15
Chapter
02
Basic
operation
Basic operation