Calculating the fuel consumption 151, Exporting the data of fuel cost, Information – Pioneer SUPER TUNER 3 D AVIC-Z120BT User Manual

Page 151: Customizing preferences, Calculating the fuel consumption, Exporting the data of fuel cost information

Advertising
background image

Calculating the fuel consumption

When you enter the fueling information to the
navigation system, and export the data to SD
memory cards, you can check the fuel con-
sumption information by using the utility pro-
gram AVIC FEEDS, which is available
separately, on your PC.
p Up to 24 sets of data can be stored. You

can also export the data, as described
below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.

These calculations are based only on the infor-
mation that you provide and not on any data
from the vehicle. The fuel mileage displayed is
only a reference value, and does not guarantee
the fuel mileage displayed can be obtained.

1

Display the

“Navi Settings” screen.

= For details, refer to Displaying the “Navi

Settings

” screen on page 148.

2

Touch [Gas Mileage].

The

“Gas Mileage Setting” screen appears.

3

Touch [Gas Price Calculation].

The

“Gas Price Calculation” screen appears.

4

Enter the fuel consumption informa-

tion.

Enter the following items:

! Distance:

Enter the distance traveled since the pre-
vious fueling.
p The distance is entered automatically

only when the distance traveled since
the previous fueling is recorded.

! Gas Pumped:

Enter the amount of fuel pumped.

! Gas Price Per Unit:

Enter the fuel unit price.

When all the items are entered, the fuel con-
sumption is displayed next to

“Gas Mileage”.

5

Touch [OK].

The

“Gas Mileage Setting” screen appears.

Exporting the data of fuel cost
information

Exporting the fuel cost data to an SD memory
card is possible.
p The data stored in this navigation system

will be cleared as exporting it to the SD
memory card.

p If there is previous data in the SD memory

card, the data is overwritten with new data
when current data is exported.

1

Insert an SD memory card into the SD

card slot.

= For details of the operation, refer to Insert-

ing and ejecting an SD memory card on
page 15.

2

Display the

“Navi Settings” screen.

= For details, refer to Displaying the “Navi

Settings

” screen on page 148.

3

Touch [Gas Mileage].

The

“Gas Mileage Setting” screen appears.

En

151

Chapter

31

Customizing

pr
eferences

Customizing preferences

Advertising
This manual is related to the following products: