Pioneer VSX-AX4AVi-G - Manual (Page 49)

Other connections 08
49
En
1 Use an i.LINK cable to connect one of the i.LINK
connectors on this receiver to an i.LINK connector on
your i.LINK component.
• The arrow on the cable connector body should be
lined up with the arrow (to the left of the connector)
on the receiver for correct alignment. The i.LINK
cable should be inserted straight into the connector
so that it snaps easily into place. If not connected
properly the receiver will not be able to recognize any
connected components. Note that the i.LINK cable is
fragile and can be broken easily if too much force is
used when connecting.
2 Assign the i.LINK component to the input you want,
then make any necessary output settings on the
component.
See The Input Setup menu on page 60 to assign the
component to an input function on this receiver. Follow
the operating instructions that came with the component
to make any necessary output settings.
• You can connect several components together using
i.LINK. See Creating an i.LINK network below.
Checking the i.LINK inputs
If you have several i.LINK-equipped components and
have assigned them to input functions in
The Input Setup
menu on page 60, you can confirm the settings you made
below.
1 Select ‘i.LINK Check’ from the Other Setup menu
and press ENTER.
See The Other Setup menu on page 61 for more on
navigating this menu screen.
• If no i.LINK-equipped components are connected
i.LINK Check cannot be selected.
2 Scroll through the list to confirm your settings.
When a number of i.LINK-equipped components are
connected to your receiver, the i.LINK-equipped
component you are looking for might be listed on
additional display screens.
• i.LINK is displayed after unassigned device names
(e.g. DV-868AVi [i.LINK] ).
• If a connected devices cannot output (playback) a
source using the i.LINK connection, [- - - -] is
displayed after the input device name (e.g. DV-
868AVi [- - - -] ). Non-compatible devices cannot be
assigned to inputs.
• When the cables for an assigned input device
become loose or the power is cut to the device, an
asterisk (
* ) appears before the device name (e.g.
*DV-868AVi [CD] ).
3 When you're finished, press RETURN .
You will return to the Other Setup menu.
About i.LINK
i.LINK is a trademark name for IEEE1394, a high-speed
interface for digital audio, video and other data found on
personal computers, digital camcorders, and other kinds
of audio and audio/visual equipment. A single i.LINK
connector can both send and receive data at the same
time, so only one cable is required to connect compo-
nents for two-way communication.
“i.LINK” and the “i.LINK” logo are trademarks of Sony
Corporation.
S400
(AUDIO)
S400
MULTI-ROOM &SOURCE /REC SEL
OUT1 ROOM3(ZONE3)
OUT2
USB
AUDIO
IN
IN 1
(SAT)
IN 2
(DVR/
VCR 1)
IN 3
(DVR/
VCR 2)
IN
4
(CD-R)
1–2
1–3
1–4
IN 1
(DVD/
LD) IN 2
IN 1(DVD/LD)
IN 2(TV)
IN 1
IN 1
IN 2
IN 3 IN 3
OUT
MULTI-ROOM & SOURCE
MULTI-ROOM & SOURCE
MONITOR OUT
12 V TRIGGER
ROOM2(ZONE2) ROOM2(ZONE2)
FM UNBAL 75 Ω AM LOOP
MONITOR OUT
OUT
CD
CD-R/ TAPE
DVD/ LD
TV
SAT
VIDEO1/
GAME1
OUT
DVR/ VCR 1
DVR/ VCR 2
OUT
IN
IN
IN
VIDEO
VIDEO AUDIO
S - VIDEO
IN
IN
IN
FR FL
SUB W. CENTER
MULTI CH
IN
RS-232C
SUR- ROUND
SURROUND
BACK
CONTROL
iPod
SUB W.
F
C
OUT
PHONO
IN
IN
IN
IN
ROOM2
(ZONE2)
IN
(DC OUT 12V TOTAL 50mA MAX)
1 2
IN 2
(CD)
IN1
IN2
OUT Y
P B
P R
Y
P B
P R
Y
P B
P R
Y
P B
P R
DIGITAL COMPONENT VIDEO
ASSIGNABLE
ASSIGNA- BLE
1–2
ASSIGNABLE
OUT
IN OUT
ANTENNA AUDIO PRE OUT
MULTI-ROOM & SOURCE
IR
HDMI
R L
R
R
L
R L
L
R L
R L
R L
(AUDIO)
S400
i.LINK-equipped component
VSX-AX4AVi
7.Other Setup
:Return
a.Multi Room Setup
b.SR+ Setup
c.OSD Adjustment
d.i.LINK Check
7d.i.LINK Check (1/2)
( End )
* DVD-Audio5 : TV
1 DVD-Audio1 : DVD
2 DVD-Audio2 : DVR
3 DVD-Audio3 : i.LINK
4 DVD-Audio4 : i.LINK
5 DVD-Video1 : ----
( Next )
:Return
VSX_AX4AVi_G.book.fm 49 ページ ２００５年７月６日 水曜日 午後４時１２分