Pioneer VSX-1017AV-K - Manual (Page 32)

Listening to your system 05
32
En
Using Midnight and Loudness
The Midnight listening feature allows you to hear
effective surround sound of movies at low volume levels.
The effect automatically adjusts according to the volume
at which you’re listening. The Loudness listening feature
can be used to get good bass and treble from music
sources at low volume levels.
• Press RECEIVER then press MIDNIGHT/LOUDNESS
to switch between MIDNIGHT, LOUDNESS, and OFF.
Using the Sound Retriever
When audio data is removed during the WMA/MP3/
MPEG-4 AAC compression process, sound quality often
suffers from an uneven sound image. The Sound
Retriever feature employs new DSP technology that
helps bring CD quality sound back to compressed 2-
channel audio by restoring sound pressure and
smoothing jagged artifacts left over after compression.
• Press RECEIVER then press S.RETRIEVER (SOUND
RETRIEVER) to switch the sound retriever on or off.
Enhancing dialog
• Default setting: OFF
The Dialog Enhancement feature localizes dialog in the
center channel to make it stand out from other
background sounds in a TV or movie soundtrack.
• Press RECEIVER then press DIALOG E to switch
dialog enhancement on or off.
Using the tone controls
Depending on what you are listening to, you may want to
adjust the bass or treble using the front panel tone
control. 1
1 Press TONE to select the frequency you want to
adjust.
Press to switch between
BASS and TREBLE.
2 Use the MULTI JOG dial to change the amount of
bass or treble as necessary.
The bass and treble can be adjusted from
–6 to +6 (dB).
• Wait about five seconds for your changes to be input
automatically.
Note
1 The tone controls are only available when the stereo mode or the Front Stage Surround Advance mode is selected (except when STEREO is selected using
AUTO SURROUND).
VSX-1017_HY.book Page 32 Tuesday, March 6, 2007 3:53 PM