09 other connections, Connecting an ipod, Connecting your ipod to the receiver ipod playback – Pioneer VSX-1017AV-K User Manual
Page 46: Other connections, Other connections 09, Chapter 9, Connecting your ipod to the receiver, Ipod playback, Finding what you want to play, Vsx-1017av
Other connections
09
46
En
Chapter 9:
Other connections
Caution
• Make sure the power is switched off before making or
changing the connections.
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow
you to control playback of audio content from your iPod
using the controls of this receiver.
1
Connecting your iPod to the receiver
1
Set this receiver to the standby mode, and then use
the Control Dock for iPod supplied with an iPod control
cable
2
to connect your iPod to the iPod terminal on the
rear panel of this receiver.
Push the connector in until you hear it click home. To
disconnect, squeeze the connector (as shown) to release
the catch, then pull out.
2
Switch the receiver on and press the iPod input
source button to switch the receiver to the iPod.
The front panel display shows
Loading while the receiver
verifies the connection and retrieves data from the iPod.
3
Use the TOP MENU button to display iPod Top
menu.
When the display shows
Top Menu you’re ready to play
music from the iPod.
3
• If after pressing
iPod the display shows No
Connection, try switching off the receiver and
reconnecting the iPod to the receiver.
iPod playback
To navigate songs on your iPod, you can take advantage
of the OSD of your TV connected to this receiver.
4
You can
also control all operations for music in the front panel
display of this receiver.
Finding what you want to play
When your iPod is connected to this receiver, you can
browse songs stored on your iPod by playlist, artist,
album name, song name, genre or composer, similar to
using your iPod directly.
1
Use the
/ buttons to select a category then
press ENTER to browse that category.
• To return to the previous level any time, press
RETURN.
Note
1 This system is compatible with an iPod, iPod mini, iPod nano and iPod Photo portable device (third generation and above), however, compatibility may
vary depending on the software version of your iPod. This receiver does not support software versions prior to iPod update 2004-10-20. For supported
versions, consult your local Pioneer dealer.
VSX-1017AV
CD
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
IN
IN
IN
IN
MONITOR
OUT
OUT
OUT
CD-R/TAPE/MD
DVD/LD
DVR/VCR1
DVR/VCR2
TV/SAT
CONTROL
iPod
IN
AUDIO
ANTENNA
AM LOOP
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
DIGITAL
ASSIGNABLE
OPTICAL
COAXIAL
VIDEO
S-VIDEO
PRE OUT
COMPONENT VIDEO
OUT
HDMI
ASSIGNABLE
ASSIGNABLE
OUT
(TV/SAT)
(DVD/LD)
(CD)
(DVR/
VCR1)
IN
IN
OUT
1
IN
1
1
(TV/SAT)
IN
2
IN
2
IN
3
(DVD/LD)
IN 1
(DVR/VCR2)
IN 2
IN 2
IN 3
3
1
R
L
R
R
R
L
L
L
OUT
IN
2
1
2
1
ASSIGNABLE
3
1
CENTE
CENTER
MULTI CH IN
FRONT
FRONT
SUR-
ROUND
SUB
WOOFE
SUB
WOOFER
iPod cable
MENU
iPod
Music >
Extras >
Settings >
Shuffle Songs
Backlight
Control Dock
for iPod
2 • This product is the Pioneer Control Dock for iPod (IDK-90C) for use with an iPod
®
(third generation and above), iPod mini, iPod nano or iPod Photo.
• For detailed instructions on using the iPod, please refer to the manual supplied with the iPod.
• The connected iPod should be updated with iPod updater software higher than version 2004-10-20.
3 The controls of your iPod will be inoperable when connected to this receiver (
Pioneer shows in the iPod display). Features such as the equalizer cannot
be controlled using this receiver, and we recommend switching the equalizer off before connecting.
4 • Note that non-roman characters in the playlist are displayed as
#.
• This feature is not available for photos or video clips on your iPod.
iPod Top
[
Playlists
]
[
Artists
]
[ Albums
]
[
Songs
]
[
Podcasts
]
[
Genres
]
[
Composers
]
[
Audiobooks
]
[
Shuffle Songs
]
E n t e r
VSX-1017_HY.book Page 46 Tuesday, March 6, 2007 3:53 PM