Panasonic DMP-BD55 - Manual (Page 19)

RQT9243 or RQT9350
19
Playback Basic play (Playing video contents)
Instructions for operations are generally described using the remote
control in these operating instructions.
[DivX] : [BD55] only
Preparation
Turn on the television and select the appropriate video input on the
television.
1 Press [ Í BD POWER] to turn on the
unit.
2 Press [ < OPEN/CLOSE] to open the
disc tray and insert the disc.
≥ Insert double-sided discs so the label for
the side you want to play is facing up.
≥ DVD-RAM: Remove discs from their
cartridges before use.
≥ Press the button again to close the tray.
Play starts.
≥ If the menu is displayed, press [ 3 , 4 , 2 , 1 ] to select the item and
press [OK].
≥ If the screen prompting you to use the color buttons appears,
continue to operate with the color buttons on the remote control.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [
∫ ] when you have finished playback to protect the unit’s
motor, your television screen and so on.
≥ The producers of the disc can control how discs are played. So you
may not always be able to control play as described in these
operating instructions. Read the disc’s instructions carefully.
≥ When playing a set of two or more BD-Video discs, the menu
screen may continue to display even if the disc has been ejected.
To switch drives
Press [BD/SD] to select “BD” to play a disc.
≥ If a disc or an SD card is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with some BD-Video
discs. This menu may vary with discs. For the operating method, refer
to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [
3 , 4 , 2 , 1 ] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and selecting
“Pop-up Menu”.
≥ Press [POP-UP MENU] to exit the screen.
Other operations during play
(These functions may not work depending on the disc.)
Stop
The stopped position is memorized.
Resume play function
Press [ 1 ] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [ ∫ ] several
times to display “STOP” on unit’s display.
≥[BD-V] : On BD-Video discs including BD-J ( > 46), the resume
play function does not work.
≥[CD] [MP3] [DivX] : The position is cleared if the unit is turned off.
Pause
≥ Press [ ; ] again or [ 1 ] (PLAY) to restart play.
Search/Slow-motion
The speed increases up to 5 steps.
≥ Press [ 1 ] (PLAY) to revert to normal playback speed.
≥ For some discs, the speed may not change.
Search
While playing, press [ 6 ] or [ 5 ].
≥[BD-V] [AVCHD] [DVD-VR] [DVD-V] :
Audio is heard during first level of forward search.
≥[DivX] : Audio is not heard during all levels of search.
≥[CD] [MP3] : The speed is fixed to a single step.
Slow-motion
While paused, press [ 6 ] or [ 5 ].
≥[BD-V] [AVCHD] : Forward direction [ 5 ] only.
≥[DVD-VR] : If continued for approx. 5 minutes, slow-motion play
pauses automatically.
Skip
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
≥[DivX] : Backward direction [ : ] only.
Direct Play
During playback, you can access specific recordings or scenes
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
≥ While stopped (the image on the right is
displayed on the screen), the title is designated.
While playing, the chapter is designated.
VOL
RE-MASTER
SKIP SLOW/SEARCH
STATUS FUNCTIONS
A B C D
RETURN SUB MENU
AUDIO
MUTING
PO P-UP MENU
PLAY PAUSE STOP
S
CANCEL
PIP SECONDARY
AUDIO BD/SD
SETUP
DI RE
CT
N AV
IG
AT OR
OK
RECEIVER
CH VOL
POWER
POWER
TV/VIDEO OPEN/CLOSE
TO
P M
E N U D IS
P LA
Y





e.g.,
[BD-V] [AVCHD]
e.g., 5: [0] B [0] B [5]
15: [0] B [1] B [5]
[DVD-V]
e.g., 5: [0] B [5]
15: [1] B [5]
STOP
PAUSE
SLOW/SEARCH
SKIP
Pl
a
y
ba
c
k
G
e
tti
n
g
star
te
d
DMP-BD55_35PP-RQT9243_ENG.book 19 ページ ２００８年８月２９日 金曜日 午前１０時２８分