Panasonic DMP-BD55 - Manual (Page 26)

RQT9243 or RQT9350
26
Linked operations with the TV
(VIERA Link TM “HDAVI Control TM ”)
Preparation
1) Connect this unit to your TV or amplifier/receiver with an HDMI cable ( > 11–12).
2) Set “VIERA Link” to “On” ( > 32). (The default setting is “On”.)
3) Set the “HDAVI Control” operations on the connected equipment (e.g., TV).
≥ When using HDMI2 terminal of VIERA as “HDAVI Control”, set the input channel to HDMI2 on VIERA.
4) Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control”
function works properly.
Also when the connection or settings are changed, repeat this procedure.
≥ When [ 1 ] (PLAY) is pressed on this unit for “Automatic input switching” or “Power on link”, the playback image is not immediately displayed on the
screen and it may not be possible to watch the contents from where playback started.
In this case, press [
: ] or [ 6 ] to go back to where playback started.
Playing music continuously even after turning off power to the television
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or HDAVI Control 3 and an amplifier/receiver supports
VIERA Link, the unit is turned off if the power to the television is turned off, since “Power off link” (
D above) operates.
The following operations make it possible to keep the power of the unit on and to play music continuously.
1 While playing music
Press [SUB MENU].
2 Press [ 3 , 4 ] to select “TV Power” and press [OK].
≥ Sound may be discontinued for several seconds when the power to the television is turned off.
≥ If the operation mentioned above is executed while audio is output from the television, the sound may not be output from the amplifier/receiver.
It is recommended to set the amplifier/receiver beforehand so that audio will be output from the amplifier/receiver.
Automatic input
switching
When the following operations are performed, the television will automatically switch the input channel and display
the corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
Power on link
When the television is off and the following operations are performed, the television will automatically turn on and
display the corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct Navigator screen)
Power off link
All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you
switch the television off.
≥ This unit automatically turns off even during playback or any other operation.
What is VIERA Link “HDAVI Control”?
VIERA Link TM is a new name for EZ Sync TM .
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or
amplifier/receiver under “HDAVI Control”.
You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment
for operational details.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of December, 2007) for Panasonic’s HDAVI Control compatible equipment. This standard
is compatible with Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
DMP-BD55_35PP-RQT9243_ENG.book 26 ページ ２００８年８月２９日 金曜日 午前１０時２８分