PYLE Audio PLCD82MP User Manual

Page 6

Advertising
background image

5

6

(4). FILE SEARCH

2. OPEN BUTTON
Press it to flip down the front panel and you can insert the disc
into the CD compartment or press the EJ button to eject the disc
from the disc compartment or take away the front panel.

3. LCD (LIQUID CRYSTAL DISPLAY)

4. UP AND DN BUTTONS
(1)In RADIO mode, press ^ or v button shortly and repeatedly to
manually tune up or down for the desired radio station with step by
step. Press ^ or v button hold for more than 0.5 seconds to
auto-matically tune up or down for the radio station of strong signal.

during MP3 mode:

A. Press A.P button shortly twice to select FILE SEARCH mode, the
LCD will display FILE SCH.
B. Press SEL button shortly once to select and display the first folder.
Then press + or - button to select the folder with step by step forward
or backward.
* Press SEL button hold for more than 0.5 second to play the first
track of the selected folder.
C. Press SEL button shortly once to select and display the first track
of the selected folder. Then press + or - button to select the track
in the folder with step by step forward or backward.
D. Press SEL button shortly once to play the selected track.
(5). CHARACTER SEARCH MODE during Mp3 mode:
A. Press A.P button shortly three times to select CHARACTER SEARCH
mode, the LCD will display CHAR SCH.
B. Press SEL button shortly once to display A in the first digit from left
to right. Then press + or - button repeatedly to select one of A-Z
and 0-9 and * to replace A. At this time press SEL button hold for
more than 0.5 seconds to play the track which first character is
the selected one.
C. Press SEL button shortly once to display A in the second digit from
left to right. Then press + or - button repeatedly to select one of A-Z
and 0-9 and * to replace A.
D. Press SEL button shortly once to display A in the third digit from
left to right. Then press + or - button repeatedly to select one of A-Z
and 0-9 and * to replace A.
E. Operate as same as above to select the character in the fourth, fifth,
... Xth digit from left to right.
F. Press SEL button hold for more than 0.5 second to play the track
that the name selected.
NOTE: During CHARACTER SEARCH mode, press A.P button to
delete the last character.

(2)In CD mode, press ^ button to play next track. Press v button
once to play the current track from the beginning of the current
track, press v button twice continuously to play the last track.
Press ^ or v button hold to skip forward or backward.

5. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON
(1)In radio mode, press it to perform all stations memory for 5 seconds
each time, while memory digital and frequency will flash on LCD. If
the button is pressed for more than 2 seconds, it will seek station
on current band, then write to the preset memories. When the
auto-storage operation is completed, it will automatically perform
for 5 seconds each time. During the memory station performing,
press 1-6 digital buttons to select and stop scanning function.
(2)In MP3 mode, press A.P button repeatedly to select TRACK SEARCH,
FILE SEARCH or CHARACTER SEARCH mode.

Press CLK button to display time on LCD, then press CLK button

hold until time flashes on LCD, thirdly press + or - button to adjust
HOUR or MINUTE.

Press any button except the EJECT and OPEN button to turn on the

unit, press PWR button hold for more than 0.5 seconds to turn off
the unit.(After switching on the ACC POWER first time for 3 seconds,
can only turn on the unit)

6. BAND BUTTON
Press it repeatedly to select your desired radio band during RADIO
mode.

7. CLOCK BUTTON

10.STEREO/MONO BUTTON
Press it repeatedly to select STEREO or MONO sound mode.

8. SCAN BUTTON
Press it to scan up by one channel step with station detection. If a
valid signal has detected, the current frequency is blinked within 5
seconds, then press it again to stop scan and remain the current
frequency; otherwise, the unit continue to scan up by one channel
step with station detection 5 seconds later.

9. POWER BUTTON

11.MUTE BUTTON
Press the button to eliminate or resume the sound immediately.
To resume the sound immediately, can also press MODE, BAND, +,
-, (LOUD) and SEL button.

Advertising