Panasonic CR-SRT100 - Manual (Page 39)

CR-SRF100/CR-SRT100
38
8.4. Receiver Wiring Harness…(M2C457018)
SPECIFICATIONS:
• Connector 1 (CDU connector): 8 position plug
• Wire type & length: 4 meters – 6-wire (22 AWG) – with shielding.
• Connector 2 (I/O Connector): 20 circuit automotive connector
• Connector 3 (left audio input): white RCA female connector (0.4 meter wire length)
• Connector 4 (right audio input): red RCA female connector (0.4 meter wire length)
• Connector 5 (FM Modulator control): 2-wire connector (0.65 meter wire length):
20 AWG cyan & yellow control wire
20 AWG black ground wire
• Lead 6 (Ground): 20 AWG black wire (0.65 meter wire length)
• Lead 7 (Accessory power): 20 AWG red wire (0.65 meter wire length)
with 0.5A in-line fuse)
• Lead 8 (+ Battery power): 20 AWG yellow wire (0.65 meter wire length)
with 3A in-line fuse)
0.5 A
SW
GND
BA
T
3.0 A
(Included with CR-SRF100 Kit)
17233_SGould 08/15/02 14:46 Page 38