Paradyne OpenLane SLM 5.5 - Manual (Page 18)

2. Installing OpenLane on Solaris
2-8 January 2002 7800-A2-GB32-00
Installing Remotely Using X
You can install OpenLane from a remote host using the X Window System.
Procedure
1. On the local host, execute the following commands:
xhost + remote_host_name
rlogin remote_host_name -l username
username must have root privilege.
2. On the remote host, execute the following command or commands:
— If using the Bourne shell (sh):
DISPLAY= local_host_name :0.0
export DISPLAY
— If using the Korn shell (ksh):
export DISPLAY= local_host_name :0.0
— If using the C shell (csh):
setenv DISPLAY local_host_name :0.0
3. On the remote host, change the directory to the path where setup.sh resides:
cd /tmp
4. Run setup.sh:
./setup.sh
Installing the Permanent License Key
Procedure
1. Change the directory to /opt/pdn/OpenLane:
cd /opt/pdn/OpenLane
2. Enter the command to install the permanent key:
OLCmd key permanent_key
Where permanent_key is the key e-mailed or faxed to you by Paradyne. For
example:
OLCmd key ALUKB-KAC9Y-H987N-CX5GK