Pioneer PDR-509 - Manual (Page 18)

18
Basic Playback and Recording
Introduction to CD Recording
The PDR-509 is designed to let you make extremely high
quality digital recordings onto recordable compact discs.
For flexibility, you can use either rewritable discs (
CD – RW )
or write-once discs ( CD – R ). For more general information
on the discs you can and can’t use with this recorder, see
About
CD , CD – R and CD – RW Discs on page 8. The over-
view on this and the following page gives you some idea
of what the PDR-509 is capable of, and also provides
guidance on what to avoid and things to be careful of
when recording. We strongly recommend that you read
these pages fully before proceeding to the more
detailed instructions on the following pages.
Recording modes
The recorder is equipped with a set of analog input
terminals, as well as both optical and coaxial digital inputs.
This means that the PDR–509 is compatible with almost
all audio sources — analog or digital. It even has a built in
sampling rate converter making it ideal for recording
DAT
tapes or satellite broadcasts, for example, which are often
at sampling rates different to that of
CD . Since CD s are
always recorded at a sampling rate of 44.1kHz, sample
rate conversion is completely automatic — if the recorder
senses a digital signal at either 32 or 48kHz, it will convert
it to 44.1kHz.
Note that this recorder can't convert 96kHz
digital sources (such as some DAT tapes and DVD discs).
There are five recording modes available —four for digital-
input recording, and one analog-input record mode. The
table below provides a brief summary of each.
Digital recording restrictions
This unit has been designed exclusively for recording and
playback of audio discs —
you can’t record other CD
formats, such as computer CD - ROM s or Dolby Digital
(AC-3). If you record from a disc format such as
CD + GRAPHICS , VIDEO - CD , or other format that includes
both digital audio and video or text, you will only be able to
record the audio part of the disc.
In addition to standard audio CD s, this recorder will record
DTS encoded audio CD s and HDCD format CD s, however.
Almost all commercial digital source material is protected
by copyright laws. For this reason, the PDR-509 uses special
consumer-use blank
CD - R and CD - RW discs on which a
copyright fee has already been paid. A further restriction
comes in the form of
SCMS (an acronym for Serial Copy
Management System). This generally allows just one
generation of digital recording. In other words, you can
make a digital recording from an original source (such as a
commercial
CD ), but you can’t then make further digital
recordings from that copy. Most digital recording equip-
ment uses the
SCMS system, including CD and MD
recorders, and DAT decks. You may also find that you can’t
record certain DVD discs as the digital output of the DVD
player can be disabled by the disc.
Of course, if you do encounter SCMS or other digital-copy
restrictions, you can always record through the analog
inputs of the PDR-509. To check whether a source is
digital-copy protected, see
Checking for Digital Copy
Protection on page 32.
Mode
Automatic digital-
input 1-track synchro
recording
Automatic digital-
input all-track
synchro recording
Automatic finalization
recording
Manual digital-input
recording
Analog-input
recording
Description
Recording starts after the recorder senses an
input signal. Once the track has finished, the
recorder stops recording
Recording starts after the recorder senses an
input signal, and continues until all tracks on
the source have finished. The recorder then
stops automatically
As automatic digital-input all-track synchro
recording, above, with automatic finalization
of the disc after all tracks have been recorded
Recording start and stop is completely under
the user's control
Records any analog audio source through the
analog inputs. Unlike digital-input recording,
you must set the recording levels, as you
would with analog tape.
Uses
Good for recording edited versions of CD s,
MD s, DAT s or DCC tapes. Full instructions on
page 20.
Good for recording complete CD s, MD s, DAT s
or DCC tapes. Full instructions on page 21.
Good for recording complete CD s, MD s, DAT s
or DCC tapes when you don't want to record
anything else on the disc afterwards. Full
instructions on page 22.
Useful for recording digital sources other than
CD , MD , DAT or DCC , which may not have
track numbers (digital satellite broadcasts, for
example). Full instructions on page 23.
As well as analog sources, such as vinyl
records, this mode can be used for digital
sources that are digital-copy protected. Full
instructions on page 25.