Primate Systems PDP TV - Manual (Page 23)

Memorizing the Channels
(continued)
Setting Auto Fine Tune (AFT)
search
source
autoset
<select> to enable
auto fine tune
fine tune
channel skip 50
1
3
2
When the AFT is set to On, the unit will automatically tune
the program frequency to provide the best possible
Manual Fine Tuning
1
2
right/left to adjust automatic fine tune
3
Press to fine tune till the best possible picture and
sound are obtained.
VOL+/-
Adding and Erasing Channels
2
3
Use to directly select a channel that will
be added or erased.
number buttons
1
4
When the item is set to on, the selected channel will be
erased.
off, the selected
channel will be added.
The erased channels can not be selected by using the
buttons unless you use to
When the item is set to
CH / number buttons
5 6
search
source
autoset
<select> to enable
auto fine tune
fine tune
channel skip
right/left to adjust fine tuning
50
search
source antenna cable
autoset <select> to enable
auto fine tune on off
fine tune
channel skip on off
right/left to set channel skip
50
20
antenna cable
off on
off on
antenna cable
off on
off on
If you fine tune a program manually, the auto fine tune
Repeat steps 1~4 in [ ] to Selecting the Signal Source
Repeat steps 1~4 in [ ] to Selecting the Signal Source
Repeat steps 1~4 in [ ] to Selecting the Signal Source