Primate Systems PDP TV - Manual (Page 29)

Fill All
Normal
Wide
Zoom
The Fill All mode stretches the input vertically and horizontally to fill the display from edge to edge.
This mode is the default mode.
The Normal mode fills the display vertically with a 4:3 aspect picture, preserving the geometry of the
input format. It performs the same as the Fill to Aspect Ratio mode..
The Wide mode only affects displays that are greater than 4:3 aspect. If the picture is less than or
equal to 4:3, this mode acts as if it is in Normal mode. It is intended to display 4:3 images on a 16:9
panel with the least picture deformity. The center of the picture is left unstretched. The left and right
sides of the picture are stretched in a non-linear fashion with the areas of greatest distortion on the
extreme left and right edges of the picture. The top and bottom five percent of the picture are
cropped.
If the display aspect ratio is greater than 4:3, this mode fills the panel horizontally, cropping 10
percent off the top and bottom of the picture. If the display aspect ratio is less than 4:3, this mode
Changing Screen Options
Changing the Scaling mode of Image
1
2
4
Freezing the Picture
50
window
50
image size
h position
v position
freeze window
off on
digital pan and zoom
fill all
3
1
2
4
3
When you set this item to , the current picture will be on
Note:
This menu item appears
only when the current screen
layout is full screen.
The image size can be selected between: fill all, normal,
wide a
zoom . nd
right/left to change image size
50
window
50
image size
h position
v position
freeze window off on
digital pan and zoom
fill all
left/right to freeze current window
26