Pioneer DEH-P4800MP - Manual (Page 17)

17
EN
G
L
IS
H
MP3/WMA/WAV Player
Playing MP3/WMA/WAV
These are the basic steps necessary to play an MP3/WMA/WAV with your built-in CD
player. More advanced MP3/WMA/WAV operation is explained starting on this page.
1. Insert a CD-ROM into the CD loading slot.
Playback will automatically start.
• You can eject a CD-ROM by pressing EJECT.
• To avoid a malfunction, make sure that no metal object comes into contact with the
terminals when the front panel is open.
2. Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3. Press 8 or 2 to select a folder.
• You cannot select a folder that does not have an MP3/WMA/WAV file recorded in it.
• To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT)
contains no files, playback commences with folder 02.
4. To perform fast forward or reverse, press and hold 4 or 6.
• This is fast forward and reverse operation only for the file being played.
• If you select ROUGH, pressing and holding
4 or 6 enables you to search every 10
tracks in the current folder. (Refer to “Selecting the search method” on page 19.)
5. To skip back or forward to another track, press 4 or 6.
Pressing 6 skips to the start of the next track. Pressing 4 once skips to the start of the
current track. Pressing again will skip to the previous track.
ቢ Track number indicator
Shows the track (file) currently
playing.
ባ Folder number indicator
Shows the number of folder
currently playing.
ቤ Play time indicator
Shows the elapsed playing time of
the current track (file).
ብ WMA indicator
Shows when a WMA file is playing.
ቦ MP3 indicator
Shows when an MP3 file is playing.
Notes
• When playing discs with MP3/WMA/WAV files and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
• If you have switched between playback of MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
• The built-in CD player can play back an MP3/WMA/WAV file recorded on CD-ROM. (Refer
to page 32 for files that can be played back.)
• Do not insert anything other than a CD into the CD loading slot.
• There is sometimes a delay between starting up CD playback and the sound being issued.
When being read, FORMAT READ is displayed.
• If you cannot insert a disc completely or if after you insert a disc the disc does not play, check
that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for
damage before inserting it again.
• Playback is carried out in order of file number. Folders are skipped if they contain no files.
(If folder 01 (ROOT) contains no files, playback commences with folder 02.)
• When playing back files recorded as VBR (variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse operations are used.
• If the inserted disc contains no files that can be played back, NO AUDIO is displayed.
• If the inserted disc contains WMA files that are protected by digital rights management
(DRM), SKIPPED is displayed while the protected file is skipped.
• If all the files on the inserted disc are secured by DRM, PROTECT is displayed.
• There is no sound on fast forward or reverse.
• If an error message such as ERROR-11 is displayed, refer to “Understanding built-in CD
player error messages” on page 31.
• When an MP3/WMA/WAV disc is inserted, folder name and file name begin to scroll to the
left automatically.
Introduction of advanced built-in CD player (MP3/WMA/
WAV) operation
* Press FUNCTION to display the
function names.
Press FUNCTION repeatedly to switch between the following functions:
RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) –
COMP (compression and BMX) – FF/REV (search method)
• To return to the playback display, press BAND.
Note
• If you do not operate the function within about 30 seconds, the display is automatically
returned to the playback display.
ቢ Function display
Shows the function status.
ባ RPT indicator
Shows when repeat range is
selected to current track (file).
MAN-DEH-P4800MP-GB.fm Page 17 Thursday, September 29, 2005 11:55 AM