Pioneer PRS-D1000M - Manual (Page 13)

12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
кмллдав
Four Amplifier
MODE SELECT switch
must be in MASTER position.
Connect to a car stereo.
For details, see the
“Connection Diagram”.
Connecting wire with RCA
pin plugs (sold separately).
Connecting wire with RCA
pin plugs (sold separately).
Connecting wire with RCA
pin plugs (sold separately).
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
1
Ω to 8 Ω
1
Ω to 8 Ω
1
Ω to 8 Ω
1
Ω to 8 Ω
SYNC OUTPUT
SYNC
INPUT
SYNC
OUTPUT
SYNC INPUT
• Use speakers having an impedance from 1
Ω to 8 Ω.
• The setting of the POWER MODE switch varies according to the speaker impedance. See the “Setting the
Unit” section for details. The same setting is used for four amplifiers.
SYNC OUTPUT
SYNC INPUT