PSB Speakers PSB-1688LF M1 - Manual (Page 41)

Chapter 3 Software Configuration
Page:3-4 PSB-1688LF USER
′
S MANUAL
3-4. FLASH BIOS UPDATE
3-4-1. System BIOS Update:
Users of PSB-1688LF can use the program “Awdflash.exe” contained in
the Utility Disk for system BIOS and VGA BIOS update.
3-4-2. To update VGA BIOS for LCD Flat Panel Display:
As PSB-1688LF user, you have to update the VGA BIOS for your
specific LCD flat panel you are going to use. For doing this, you need
two files. One is the “Awdflash.exe” file and the other is the VGA BIOS
for LCD panel display. Both file must be provided by the vendor or
manufacturer. When you get these two files ready, follow the following
steps for updating your VGA BIOS:
1. Install “Awdflash.exe” from Utility Disk to Drive C.
2. Insert the VGA BIOS file you have obtained from the vendor.
3. Type the path to Awdflash.exe and execute the VGA BIOS update
with file B75xxxxx.bin
C:\UTIL\AWDFLASH>AWDFLASH B75xxxxx.bin
4. The screen will display the table below:
FLASH MEMORY WRITER v7.XX
(C) Award Software 2000 All Rights Reserved
Flash Type - MXIC 29F004T /5V
File Name to Program: B88bxxxx.bin
Checksum: XXXXX
Error Message : Do You Want To Save BIOS (Y/N)
If you want to save up the original BIOS, enter
"Y" and press < Enter > .
If you choose
"N", the following table will appear on screen.