Appendix a, A.1 device‘s rj-45 pin assignments, A.2 rj-45 cable pin assignment – Planet Technology FT-90X FT-906A20 User Manual
Page 39
-36-
APPENDIX A
A.1 Device‘s RJ-45 Pin Assignments
■
10/100Mbps, 10/100Base-TX
Contact
MDI
MDI-X
1 1
(TX
+) 3
2 2
(TX
-) 6
3 3
(RX
+) 1
6
6 (RX -)
2
4, 5, 7, 8
Not used
Not used
Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly
forbidden, is beyond the scope of this standard.
A.2 RJ-45 cable pin assignment
2 1
3
6
1
2
3
6
2 1
3
6
There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation
and color of straight cable and crossover cable connection:
Figure A-1: Straight-Through and Crossover Cable
Please make sure your connected cables are with same pin assignment and color as above picture before deploying the
cables into your network.