4 product specification – Planet Technology FT-90X FT-906A20 User Manual
Page 5
-2-
;
Supports Bandwidth Control (Kbps) for both Ingress and Egress
;
Supports Broadcast Storm Control to optimize network bandwidth.
;
Supports Ethernet Statistics on both TP and Fiber interface
;
Look Back Test Function(LBT) , Link Loss Return(LLR)
;
Firmware upgrade via HTTP protocol
y
5VDC power supply
y
LED indicators for easy network diagnose
y
Reset Button at the front panel for reset to factory default
y
Choice of fiber-connector from ST, SC, MT-RJ/VF-45 and WDM, multi-mode / single-mode fiber /100Base SFP
1.4 PRODUCT SPECIFICATION
Model
FT-902
FT-902S
15
FT-902S
35
FT-902S
50
FT-905A
FT-906A
20
FT-906B
20
Hardware Specification
Ports
1 x 10/100Base-TX port,
1 x 100Base-FX port
Optic Interface
SC
SFP
WDM
Optic wavelength
1300nm 1310nm
1310nm
1310nm
-
TX:1310
RX:1550
TX:1550
RX:1310
Max.
-14 -7 -5 -0 -
-8
Launch
Power(dBm)
Min.
-19.0 -20 -9 -5 -
-14
Receive Sensitivity
-34.5 -28 -32 -34 -
-31
Maximum Input power
-14 -8 -5 -8 -
*
Twisted-pair
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
Cable
Fiber-optic cable
50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km.
9/125μm single-mode cable, provide long distance for 15/20/35/50km or longer
(very on SFP module)
Twisted-pair
10/20Mbps for Half/Full-duplex
100/200Mbps for Half/Full-duplex
Speed
Fiber-optic
200Mbps for Full-Duplex
Dimension
26 x 70 x 97mm (H x W x D)
Power Requirement
5V DC 2A
Standard Conformance
Standards
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
IEEE 802.3x Flow Control
IEEE 802.1p Class of Service
Operating Temperature
0~50ºC
Storage Temperature
-25~70ºC
Operating Humidity
10% to 90% , relative humidity, non-condensing
Storage Humidity
10% to 90% , relative humidity, non-condensing
Regulation Compliance
FCC Part 15 Class B, CE