Panasonic WORKIO DP-C262 - Manual (Page 115)

115
Chapter 5 Internet Fax
Setting Subject
Every time you send Email, you can enter its
subject manually. To enter a subject, follow the
steps below:
z Default Subject is preset if “21 Default Subject”
has been set in Function Parameters (Fax/Email
Settings> User Parameters). For programming
instructions, refer to Fax/Email Settings in the
Operating Instructions (For Function Parameters)
on the provided CD-ROM.
1
On the Email screen, select “Subject”.
(See pages 103 and 112)
2
Enter a subject, and then select “OK”.
z The subject field is up to 40 characters in
length.
z
For using the onscreen keyboard, refer to
Before Starting in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
z If you make a mistake, select “Back Space”
to delete one digit at a time, or move the
cursor to the beginning of the field, and then
press Clear key to delete the entire entry.
3
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts email transmission.
Confirming the Destination
You can confirm the entered destinations.
1
Select “Destinations:###”.
(###: Number of selected addresses)
2
Select desired field button and confirm
destinations.
z
To delete a destination, select a destination,
and then select “Delete” and “Yes”.