Panasonic WORKIO DP-C262 - Manual (Page 84)

84
Chapter 4 Fax Reception
Fax Forwarding
This feature allows all incoming faxes to be forwarded to the station registered in the address book. It is
convenient when you want to receive fax calls at a location away from your office (such as your home)
at night, or during holidays.
z The standard setting of “54 Fax Forward” is set to “Invalid” in Function Parameters (Fax/Email Settings> Fax
Parameters). For instructions on how to enable the fax forwarding feature, refer to Fax/Email Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
z When the Fax Forward feature is set, the station programmed in the address book is restricted from editing. To
change a programmed destination, follow the steps below:
1. Set “54 Fax Forward” to “Invalid” in Function Parameters (Fax/Email Settings> Fax Parameters).
2. Change the station entered in an address book or preprogrammed in the program dialing.
3. Reset “54 Fax Forward” to “Valid” in Function Parameters (Fax/Email Settings> Fax Parameters).
z When Fax Forwarding fails, for example, calling a busy station, the received document will print and is deleted
from the memory.
z Fax Forwarding will be disabled if the machine has 5% or less of memory remaining.
Sender A
Receiver
Forward
Sender B