Epson Stylus Pro 7000 - Manual (Page 51)

2-17
Handling Paper | 2-17
Make sure the right edge is straight. It should be aligned with the scale
on the roll paper cover (at the top) and the two rows of holes (at the
bottom).
6. Pull the paper set lever all the way up, then close the lower cover.
PRESS PAUSE BUTTON appears on the control panel display.
7. Press the Pause button. The print head moves and the paper feeds into
printing position automatically. READY appears on the control panel.
(Even if you don’t press Pause , the paper and printer will move into
printing position automatically after 10 seconds.)
8. Print your page. After it is finished, the page stays in the printer.
9. To remove your printout, hold it while pressing the Paper Feed (–)
button.
Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light is
flashing.