Panasonic GP-KS162CUD - Manual (Page 4)

-2-
PRECAUTIONS
• Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
cover. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
• Do not expose the camera or camera control unit to
rain or moisture, or do not try to operate it in wet areas.
Do take immediate action if ever the camera or camera
control unit do become wet. Turn power off and refer
servicing to qualified service personnel.
Moisture can damage the camera and camera control
unit and also create the danger of electric shock.
• Ambient Temperature range
Do not install the camera in the place which is beyond
14 °F - 104 °F (
−
10°C - +40 °C).
• Do not drop anything inside the camera.
Dropping metal for example inside the camera could
permanently damage the unit.
• Never crush or pinch the camera cable.
Do not bend the camera cable into a curve whose
radius is too small.
• Never face the camera is in use, never face it toward
the sun.
• Never face the camera toward the sun
whether the camera is in use or not, never face it
toward the sun.
Do use caution when operating the camera in the vicin-
ity of spot lights or other lights and light reflecting
objects.
• How to take care of this camera.
After turning OFF the Power ON/OFF Switch, clean it
with a dry cloth. If it is difficult to remove the dirt or
dust, clean it up with a cloth applied the neutral
cleanser.
Use the lens cleaning tissue paper(may be available at
your local camera store) for lens cleaning.
• Connect this to a DC12V, 0.5 A - 0.7 A CLASS 2 Power
supply only.
• After using the camera, turn OFF the power ON/OFF
Switch and put the lens cap on the camera head.
• Every necessary procedures with regard to install this
product should be made by qualified service person-
nel or system installers.
Caution:
Connecting or disconnecting camera cable to/from the
camera control unit must be done after turning OFF the
Power ON/OFF Switch. Otherwise, the camera head may
be damaged.