Panasonic GP-KS162CUD - Manual (Page 7)

This function is invalided by setting the white balance
again.
In the AWC mode, the Automatic Sensing Zone setting
is available.
20. Aperture Level Selection Switch
The aperture level can be selected by this switch.
High level can be obtained by turning on this switch.
Low level can be obtained by turning off this switch.
21. Cable Selection Switch
This switch is provided for optional cable GP-
CA162/38 and GP-CA162/10.
CAUTION: BE SURE TO TURN ON THIS SWITCH
BEFORE TURNING ON THE POWER.
When using the optional cable GP-CA162/2 and GP-
CA162/3, turn off this switch.
Camera Head GP-KS162H (Option)
31. Manual Iris Control Ring
This ring is used to adjust the lens iris manually.
32. Focus Ring
This ring is used to adjust the focus of the picture. To
adjust the focus, loosen the Focus Lock Ring (33) by
rotating it clockwise (viewed from the front of the cam-
era) and turn the Focus Ring until picture becomes
the best resolution. Secure the Focus Ring by rotating
the Focus Lock Ring(33) counterclockwise.
33. Focus Lock Ring
This ring is used to secure the Focus Ring.
ELC On/Off Switch (14)
On Off
On
ELC On
AGC On
ELC Off
AGC On
Off
ELC On
AGC Off
Auto Light Function
is disable
-5-
14. Electronic Light Control (ELC) On/Off Switch
When shooting the objects under the high light condi-
tion, the lighting can be controlled by the electronic
shutter mode.
This switch is used to disable the ELC function.
Normally turn on this switch.
15. AGC On/Off Switch
When shooting the objects under the low light condi-
tion, the video level can be controlled by the gain of
the video amplifier.
This switch is used to disable the AGC function.
Normally, turn on this switch.
In the Auto Light On mode, the setting mode is differ-
ent by the combination of ELC On/Off switch (14) and
AGC On/Off switch (15) as shown below.
16. White Balance Offset On/Off Switch
By turning on this switch, the white offset in the
AWC/ATW can be adjusted fine by using the R/B Gain
Controls (5).
Usually, turn off this switch.
17. 2-Memory AWC Mode On/Off Switch
By turning on this switch, the two kinds of white bal-
ance can be memorized.
The function of the White Balance Selection Switch is
changed as shown below by turning on this switch.
on
off
on
off
on
off
on
off
AGC On/Off
Switch (15)
AWC
ATW
MANU
WHITE
BAL
AWC 1
AWC 2
By turning on this switch
18/19. Back Light Control (BLC) Mode Selection Switch
The back light sensing zone can be set in the Auto
Light On mode.
00: BLC OFF (All of the screen)
01: BLC Preset 1 (Pattern 1 Sensing Zone)
10: BLC Preset 2 (Pattern 2 Sensing Zone)
Sensing
Zone
BLC Preset 1 BLC Preset 2
11: Automatic Sensing Zone
The Automatic Sensing Zone setting works effec-
tively against the optical shading around the
screen in an optical instrument use.
In this case, this camera sets the sensing zone
automatically when the AWC has been set with the
white objects.
on
off
on
off
on
off