Phase One 645 AF - Manual (Page 42)


3.9 flash compensation settings
By combined use of a Metz flash and the SCA3952 adapter, the camera
adjusts for flash. It can be adjusted within ±3EV in increments of 1/3
steps.
1. Turn on the power
Install the SCA3952 adapter on the Metz flash, and put it on the camera
then lock the flash in place using the locking knob on the flash shoe.
Turn the shutter release mode selector lever to the “S” or “C” position,
and turn ON the flash power switch.
2. When the flash charge confirmation lamp lights, press the set button
A in. The
is displayed on the main LCD panel.
3. Turn the front or rear dial to select the flash compensation value.
External LCD Panel (normal display)
4. When the shutter button is half-pressed, the display appears on
the external LCD, and appears on the LCD inside the viewfinder
with a + compensation, or appears with a – compensation.
Viewfinder LCD readouts
- If the flash-charge mark is not displayed, the flash compensation
button [A] can not be used.
- Keep pressing the set button to activate the flash compensation
mode. You can check the exposure compensation value.
- If you turn the shutter release mode selector lever to the “L” (power
OFF) position, the compensation value will be canceled.
Exposure compensation and flash compensation can be linked.
Custom settings C-25.
SET
AEL
P Av Tv
M X CF
A
SET
AEL
P Av Tv
M X CF